Learn how to design and prepare your pillow for global print with Cloudprinter.com in a few simple steps.

Download Pillow templates in all available sizes in AI and PDF formats via the link. 

With the help of the templates, you can prepare the file for print in your Adobe Illustrator simply and easily.

*While preparing your file for print, you’ll have to exclude the bleeds layer (where applicable).


First of all, you'll have to choose from available pillow sizes and read specifications in your dashboard. Currently, there are two available sizes with more options coming soon — 45x45 cm FC (17.717x17.717 in) and 40x40 cm FC (15.748x15.748 in). 

If you choose 45x45 cm FC (17.717x17.717 in) pillow size:

  1. Set bleeds
    Don't forget to add 10 mm (0.39 in) bleeds at each side of your pillow to make sure you don't lose any part of your design.
  2. Select a picture 

    You can choose to print the whole pillow area or select a smaller picture within the limits of the pillow size. 

    Keep in mind that only single-sided print is currently available.

  3. Prepare the file for printing
  • Set 300 DPI resolution
  • Choose RGB print
  • Save the file in PDF/X-4

If you choose 40x40 cm FC (15.748x15.748 in) pillow size: 

  1. Select a picture 

    The print zone is 315x315 mm (12.402x12.402 in) — you can either print the whole zone or choose a smaller picture and place it within the limits of the print zone. 

    Keep in mind that only single-sided print is currently available.

  2. Prepare the file for printing
  • Set 300 DPI resolution
  • Choose RGB print 
  • Save the file in PDF/X-4

Well done! Now you can design and send your pillow for global print with Cloudprinter.com in just a few steps.