Learn how to design and prepare your Outdoor Banner for global print with Cloudprinter.com in a few simple steps.

Download Outdoor Banner templates in all available sizes in AI and PDF formats via the link

With the help of the templates, you can prepare the file for print in your Adobe Illustrator simply and easily.

Don't forget to exclude the bleeds layer while preparing your Outdoor Banner for print. 

Follow our step by step guide to designing an Outdoor Banner: 

  1. Choose Outdoor Banner size 
    To design your outdoor banner and prepare it for printing with Cloudprinter.com, select one of the available sizes at Cloudprinter.com.
  2. Set bleeds

    The next step is setting the bleed areas at each side of your outdoor banner to make sure all important information is kept safe. 

    For this, simply add 10 mm (0.394 in) at each side of the outdoor banner. Make sure your information is within the bleed limits. 

  3. Keep in mind the hem and grommets zone 

    While designing and preparing your outdoor banner for global print with Cloudprinter.com, take into account the hem and grommets zone. 

    The hem is the edge of a piece of cloth, in this particular case of your outdoor banner, which is turned under and sewn. The hem of your outdoor banner is 40 mm (1.575 in) on each side. 

    Make sure not to put any important information in this area, as it won't be visible. 

  4. Number and size of grommets

    The grommets are located over the hem. The number of grommets varies between 4 and 12 depending on the size of an outdoor banner you choose. 

    The diameter of the grommet outer ring is 13 mm (0.512 in).  

  5. Prepare outdoor banner file for printing  
  • Set 300 DPI resolution
  • Choose RGB print 
  • Save the file in PDF/X-4.

Well done! Now you can design and print your outdoor banner anywhere in the world close to your delivery destination with Cloudprinter.com.